Advan Rz

looking at getting these advan rz in 18x9 +35 and 18x10 +35. will it work also they have it in 19's with same offset .will there be any modes involve to make it work or is it a good fitment for is350.


thanks

 

Assuming you go 225/40 in the front.... and 255/40 in the rears.. they will fit fine.

19s would be the same, with similar tire widths.

 

great thanks for your help also do these wheels work with our tpms system

 

You'll have to find out from the manufacturer.

 

do you if +25 offset will work?

 

you'll be pushing it with the +25.. i would imagine heavy rolling and maybe even some cutting.

 

My wife's 2007/205 IS came with chrome 18" factory wheels and I hate them. In fact I hate the car, but that is another story. I want to replace the 18" wheels with some Lexus OEM 17" wheels, but am thrown by offset. IS has 45mm and some other Lexus models with 17's have 50mm and I do not know if that means the wheel would move out or in by going from 45 to 50mm
I also would like to know on the 17" what would be biggest tire I could run without doing anything to fender. I would like to go to a 55 if possible in order to improve the ride. Car is mostly driving around town by little old lady and handled cautiously so am not interested in high speed tires or handling capability and thanks for any help you might give an old fart like me.

 

If you move down to the 17" wheel, the 50mm offset or the 45mm offset will be very safe and you will not have to worry about any rubbing.

As for the size of the tires, they will be 245/45/17 all-around if you are going the OEM AWD 17" Wheel route (same wheel width in all 4 corners). If you want a 55 series tire, you will have to be looking at 15" or 16" wheels. 55 series on a 17" wheel will make the car look like an off-road vehicle.

The 17" wheel should provide enough comfort and "softness" that you are looking for.

 

KAYOTIK Thank you very much and one more favor, if you had the exact same size wheel made by same company and one had 45 and other had 50mm, would the wheel tire combo try to stick out side of fender or be deeper inward and thank you again.

 

It would stick -IN- more.

I believe i answered this question in your other post as well. :lol:

 

Stock IS 250 RWD

Hi, newbie here.

I have a stock IS 250 RWD. I was told if I put an 18" in that, it could create problems because of my stock suspension. Is that true?

Thanks

 

Hi, newbie here.

I have a stock IS 250 RWD. I was told if I put an 18" in that, it could create problems because of my stock suspension. Is that true?

Thanks

Did your car come with 17" wheels? I don't know about where you are from, but here in California, all of the RWD ISX50's come with 18" wheels.

 

You'll be fine with 18" wheels. Your dealership sounds like a bunch of goons.

 

i have a 2009 is250 AWD.

the stock rims and tires size are 225/45/17

im looking at this set of black work VSXX i want to put on, same all around. what offset should i be looking at? whats the oem offset of the AWD wheels?

I want to go 19inch. I want all 4 wheels sticking out a bit compare to the oem wheel fitment. lets say the oem offset is +45, can i go +40 or 35 all around without damaging the AWD system?

Thanks

 

The AWD wheel offsets are 45mm. So if you want the wheels to fit more flush, you can go up to 35mm (assuming you keep the same wheel width.)

 

I would not roll the fenders on the new IS. Just my personal opinion.

 

19" Wheels Fitment

will these be an issue on the IS350?

Front 19x8.5 42 offset
Rear 19x9.5 43 offset

 

no it wont

 

I am planning on getting Work Sporbo Durata 18x8.5 + 38 front and 18x9.5 + 45 rear.

Tires are hankook k110 225/40/18 & 255/35/18

You guys think these settings are ok?

so basically the larger the offset number, the more the wheel sticks out?

 

Settings look fine.

The lower the offset, and wider the wheel....... the more it sticks out.
The higher the offset, and narrower the wheel.... the more it sticks in.

 

Those specs are fine but you can go more aggressive.

 

what's the most aggressive that I can do with?
Thanks

 

mid 30s a safe bet with no rubbing or fender mods needed
im going 19x8.5 +28 and 19x10 +36 and im going to shave my rear fenders

 

this is for others who may be wondering if 19 inch rims fit, yes they do without any issues and fill the arches quite nicely, i went with 9.5 rears and 8.5 fronts, tyres are 255 30 19 rear and 225 35 19 fronts using goodyear tyres, even with 3 guys sitting in the trunk no rubbing at all, in front no rubbing on full lock, ...im so glad ive lost the skinny wheel look from the rear.....just waiting for the trunk and front lip spoilers now...

 

Looking at 18" x 8" in front with an 18" x 9" 40 offset / 1.75 drop Will I have to shave the insides of the rear fenders with a grinder. . . ? Any issues... ?

Wheel Manufacture/ Model: Tork Matrix
Wheel Size: 18x8 Front, 18x9 Rear
Lip Size: 2.0" Front, 3.25" Rear
Wheel Finish: Hyper Black with Chrome Lip
Bolt Pattern/Offset: 5x114 +40ET (Front)
5x114 +40ET (Rear)

 

You should have no issues at all.

Will these fit without any camber or rolling?

20 x 8.5 Front offset 40
20 x 9.5 Rear offset 40

Those will fit fine, assuming you don't get super wide tires.

I own a 2007 RWD IS 250 and am lookin into getting rims. Im lookin into getting the Konig Lace rims and staying with 18's to keep the ride of the car comparable to stock. However i want to go staggered and have it look as aggresive as possible. These wheels come in the following sizes and offsets:
18 x 8 - 45 or 35 Offset
18 x 9.5 - 25 or 45 Offset

So, will all of the offsets fit? Without rub?
Which combination will give me the widest rear with biggest lip and normal to thin front tire/lip (ie the most aggressive look)?

Lastly, any opinions on the rims themself?

Thanks, much appreciated.

I wouldn't put Konig's on any IS. Even the cheap 1st gen models. If you want aggressive, stay in the mid 30's. 25 offset will be very aggressive and stick out like crazy. No flushness there.

10.5"x20" rear with 265-30 tires... offset +40! just camber? no rolling?

no need to roll, they will fit fine.

 

Will these fit without any camber or rolling?

20 x 8.5 Front offset 40
20 x 9.5 Rear offset 40

 

sorry to bump an old thread... what wheel is this? post #28

 

I own a 2007 RWD IS 250 and am lookin into getting rims. Im lookin into getting the Konig Lace rims and staying with 18's to keep the ride of the car comparable to stock. However i want to go staggered and have it look as aggresive as possible. These wheels come in the following sizes and offsets:
18 x 8 - 45 or 35 Offset
18 x 9.5 - 25 or 45 Offset

So, will all of the offsets fit? Without rub?
Which combination will give me the widest rear with biggest lip and normal to thin front tire/lip (ie the most aggressive look)?

Lastly, any opinions on the rims themself?

Thanks, much appreciated.

 

10.5"x20" rear with 265-30 tires... offset +40! just camber? no rolling?

 

Will these rims fit on a 2006 IS 350? MSR 045 18"

 

You need to provide more information than that.

 

Concave TE 37

I'm thinking about getting some Volk TE37's on an IS350. What is the lowest offset I can use to get the concave look without having to do any fender modification?