Lexus IS Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 · (Edited)
I have cloth seats (manual) but was able to purchase a set of leather/ecsaine power seats (front and rear bench). The wires coming out of the car to the seats are: one yellow harness for airbag, one strand that splits into 2 white harnesses (a male and female). Currently one of the 2 white harness, the male one, clicks into the manual seat (for sensor and seat belt I assume), the female one sits idle. My power seats have one big female white harness and the yellow airbag one. My problem is the harness from the car will not fit into the power seat harness. Any suggestions or schematic someone can help with? I did try a search before posting but could not find anything. Thanks!
 

·
Registered
Joined
·
609 Posts
Pics would help. I also have the service manual. PM me later and I'll see if I can find the pages you need after work.
 
1 - 7 of 7 Posts
Top