[goldark]

I went to get a baseline dyno of my car. I just wanted to know what it was stock so I can see the gains after I put my kit on.
I did three pulls:

Dyno 1 - 183.9 HP / 193.3 TRQ
Dyno 2 - 186.7 HP / 197.4 TRQ
Dyno 3 - 183.3 HP / 192.9 TRQ

all three were - SAE Horsepower.
I should be able to scan and post them up on Monday.
The car is stock.

 

[IS300GTE]

i assume it was a manual, based on the power and torque values?

 

[ltuned&boosted]

those are pretty good numbers.

 

[Martyhead]

wow...strong for a stock ride.

 

[goldark]

i assume it was a manual, based on the power and torque values?

Yep.
5 speed on 93 octane.

 

[Shiznit]

nice numbers!

 

[kuuligan]

what was the temp. when you were dynoing? that might have had an impact on the higher #'s

 

[goldark]

what was the temp. when you were dynoing? that might have had an impact on the higher #'s

it was a 30 min drive to the dyno on the highway
then waiting 10-15 minutes to set it all up
outside temp was in the 60s.

 

[jedi]

Very nice.

Always like to see people who take the time and spend the $ on a baseline.

 

[IS300_FIEND]

Those are good numbers, similar to mine. Check my sig. I dynoed with 91
octane and a nice 70 degress F.