hey everyone, i bought a gs300 transmission, and its a a650e like the is300, looks pretty much the same, plugs and all but the tailshaft connector is different, it has the rubber type like the supras do, where as my one has the slide in tail shaft conector, has anyone run into issues like this...
I have wind noise at high speeds and I wanted to check what seems to be the most common cause: missing underbody plugs.
Everything seems to be in place for big holes.
But these? (circled, looking backward under left side of the car, underbody panels removed)
Are these drain holes that should...
Hey guys, I'm new to this forum and to working on Lexus period. I did an engine swap for my nephew on his IS300. I believe it's an 05. He bought a used 2jZ? with just under 30k and it was originally from Japan. After the install I found out that the harness did not work on the stock ECU nor did...
Hey Guys. At first please don't kill me because of my English, I'm from Germany.
So, my IS was leaking pretty bad, it came from the crankshaft seal. So I decided to replace the camseals aswell. I used a new timing belt at the reassemble. Lined up the Yellow mark on the crank pulley with the 0...
Community dedicated to Lexus IS Enthusiasts. Come in and enjoy our articles, galleries and information on aftermarket parts for the IS300, IS250, IS350.
Azx64 · updated 
