Joined
·
3,256 Posts
Jaguar new convertible
1 - 5 of 5 Posts
Joined
·
3,256 Posts
I bet this new jag will leave your IS300 in the dust
Joined
·
6,168 Posts
Joined
·
3,256 Posts
ahhh ok
[This message has been edited by chromaplast (edited November 18, 2000).]
[This message has been edited by chromaplast (edited November 18, 2000).]
type [ img ] http://imageurlhere [ /img ] without te spaces between img and the brackets
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Altezza visor adhesive
General DiscussionAltezza window visors. Hey guys what’s up, I just removed my visors from one of my Is300 to put them on my other Is300 and was wondering if any of you know what the best adhesive you guys have used to put them on again. I looked around on here for a thread on it but found nothing about the...- 7
- 131
-
Purchasing 2001 IS300 180k miles. what to look for?
General DiscussionHello everyone, New to this community here. I am looking to purchase a 2001 IS as a DD for around $4k. Just wanted to know if this was a good deal, and what I should be looking out for with something that high of mileage. It's mainly going to be used just to get to and from work, about 7...- 8
- 656
-
Is300 fuel lines
General DiscussionI am trying to find a exact diagram of the fuel lines or what all the lines are there is 5 lines that comes from the back I no the two small ones are the break lines and the main fuel line but what are the other two?- 1
- 89
-
Running fuel pump to pressurize the fuel rail without ignition or cranking
General DiscussionBefore I do anything stupid: according to the diagram extract below, if I remove the fuel pump relay and apply +12V to terminal #4, the fuel pump will run at full speed and pressurize the fuel rail. Do you see it the same way?- 5
- 115
-
Pulley Rubbing Lower Tbelt cover
General DiscussionHey guys I got started doing the tbelt on my is300 again. It’s due based on age and has no problems other than a minor oil leak or two. After I got the crank pulley off I saw that it had been rubbing and melting the lower timing belt cover. This will be my 4th tbelt change that Ihave personally...- 12
- 205
Join now to ask and comment!