Lexus IS Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
322 Posts
Discussion Starter #1
I know its been covered. I have been searching for 3 days and I hate how every thread that started covering this ends up on standalone engine management. Ok. so far I know I need this parts


5spd. brake pedal
5spd, clutch pedal, assbly.
Clutch master cyl
Line from master to slave and slave cyl.
Flywheel, Clutch, throw out bearing
Tranny (w58 I guess for now)

now my questions,....

1.- Do I need a different driveline or to mod. my stock one?
2.- Any computer modification such as 5spd. ecu swap, different wiring harness, etc etc?
3.- Any mounts that need to be moded or which stock ones will work?

As far as tunning, I am getting it turboed later down the line and will probably use a Haltech or piggi back like greddy so not worried about any changes I have to made there....

Thanks in advance... Oh and I have searched...
 

·
Registered
Joined
·
832 Posts
homerun217 said:
it's cheaper to sell your '01 and get an '02+ manual

I agree, why go through all the headache, trade/sale yours for a 02+
once you drop a turbo you can allways do 6speed. Anyways good luck on the project.


-Shawn
 

·
Mr. Negative
Joined
·
12,388 Posts
i answered this in detail not more than a few days ago.
http://my.is/forums/showthread.php?t=262879&highlight=ecu

not in specific detail but in detail none the less. For a parts list please pull up Cariza's post w/ the excel spreadsheet or i'll post mine. it has part numbers and everything. Also are you willing to drop the $3k to do it, because that's what you'll spend? If not then i'll save my breath, if so then i'll post more.
http://my.is/forums/showthread.php?t=206187&highlight=r154

Guy said:
I know its been covered. I have been searching for 3 days and I hate how every thread that started covering this ends up on standalone engine management. Ok. so far I know I need this parts


5spd. brake pedal
5spd, clutch pedal, assbly.
Clutch master cyl
Line from master to slave and slave cyl.
Flywheel, Clutch, throw out bearing
Tranny (w58 I guess for now)

now my questions,....

1.- Do I need a different driveline or to mod. my stock one?
2.- Any computer modification such as 5spd. ecu swap, different wiring harness, etc etc?
3.- Any mounts that need to be moded or which stock ones will work?

As far as tunning, I am getting it turboed later down the line and will probably use a Haltech or piggi back like greddy so not worried about any changes I have to made there....

Thanks in advance... Oh and I have searched...
 

·
Registered
Joined
·
2,830 Posts
i also have all the little parts list.

problem is..since i researched this before is that 01 is going to be a B****
 

·
Registered
Joined
·
322 Posts
Discussion Starter #6
I have the 3 grand...

I just wish someone would just hand me a parts list and I can pretty much figure out the rest.... :suspiciou

And why does everyone say the 01 is too hard to convert? its just parts..?

I can do all the laybor
 

·
Mr. Negative
Joined
·
12,388 Posts
Guy said:
I just wish someone would just hand me a parts list and I can pretty much figure out the rest.... :suspiciou

And why does everyone say the 01 is too hard to convert? its just parts..?

I can do all the laybor
cariza did post a parts list. do you not read the links i posted for you. quit being lazy. i also posted the reason the '01 is harder. damn......
 

·
Registered
Joined
·
13,954 Posts
IS_Dude said:
cariza did post a parts list. do you not read the links i posted for you. quit being lazy. i also posted the reason the '01 is harder. damn......

explains it all here:

Guy
.NET Newbie


I did the reasearch for it as well...forget it :lol:
 

·
Registered
Joined
·
368 Posts
IMPRIMIS , man I think you don't even sleep... I saw you everywhere !!!

GUY : buy a manual car don't waste time and money in the converssion... I'm telling you by experience !!
 
1 - 9 of 9 Posts
Top