Lexus IS Forum banner

1 - 20 of 146 Posts

·
Premium Member
Joined
·
11,375 Posts
I know for sure that many IS3's enthusiasts that are either looking for boost or already boosted like myself will love to see some faces here. Due to popular demand, I'll start this thread that i hope can call out all the boosted IS300 out, to show the strength of the f/i forces in the IS300 community. :D

So for those can and willing to share your setup w/ us, please reply with the followings:

1. Brand/Stage#/transmission type... etc. 8)

2. Any background of the setup you like to share with us, I.E. what type of turbine/sc blower? what's the range of boost/power it's able to push? brand and type of wastegate/bov? intercooler brand and type if have one...etc. :wink:

3. A few pictures or a video of the setup and maybe the whole car, too. (A link to your pictures/videos is okay). :)

4. Hopefully some #'s on the dyno sheet and maybe some 1/4 mile time slips are welcome too. :p

5. Techs or shops who helped you install the kit/dyno/tunnings...etc for the car, and some information of them if possible for others to find help. :chill:


Anyways, let's see some eye-candyz from you... :crazy:


P.S. Let's try to keep this thread pure for some quality replies. Therefore, if you've any comments or question of anything you see in the replies, please PM those who posted it, thanx. :D
 

·
Registered
Joined
·
2,710 Posts
1.Toyomoto/Auto Tuner ...Stage:Custom/Tranny-6spd V160

2.SC300 non vvt-i head, HKS 264 cams, TT shortblock,Je Pistons,Crower Rods, NX Wet kit(75 shot) NX ntercooler spray kit,Custom fuel rail,Dual fuel pumps,Sp-67 turbo,Turbonetics RaceGate,2-HKS SS BOV's,
Haltek E6k,

3.Old Pictures:
http://www.rdmwheels.com/lexus/MattKlexusis300.htm

4.Dyno #'s pending

5.Toyomoto did intial turbo install and Haltek install. Auto Tuner is installing as we speak, My new tranny,Head, And TT block, and chroming lots of things....Each shop has their strength and weakness....Will have a LONG full write up of my car in couple weeks with all my good points and the troubles Ive had with this car....
www.toyomoto.com
www.autotuner.org
-Matt
Heres some pics of my OLD setup....

 

·
Registered
Joined
·
12,157 Posts
Re: =*Boosted IS300 Roll Call*= (PiX & ViDeo Included)

1. IS300GTE/Stage - Unknown / V160 six speed

2. SP74 turbo, custom intercooler (biggest that would fit) lots of boost

3. see the turbo magazine article thread http://turbomagazine.com/features/0312tur_is300/

4. nothing for ya yet

5. i did everything myself but the wiring, [email protected] and i did that together

-gte





IS300eR said:
I know for sure that many IS3's enthusiasts that are either looking for boost or already boosted like myself will love to see some faces here. Due to popular demand, I'll start this thread that i hope can call out all the boosted IS300 out, to show the strength of the f/i forces in the IS300 community. :D

So for those can and willing to share your setup w/ us, please reply with the followings:

1. Brand/Stage#/transmission type... etc. 8)

2. Any background of the setup you like to share with us, I.E. what type of turbine/sc blower? what's the range of boost/power it's able to push? brand and type of wastegate/bov? intercooler brand and type if have one...etc. :wink:

3. A few pictures or a video of the setup and maybe the whole car, too. (A link to your pictures/videos is okay). :)

4. Hopefully some #'s on the dyno sheet and maybe some 1/4 mile time slips are welcome too. :p

5. Techs or shops who helped you install the kit/dyno/tunnings...etc for the car, and some information of them if possible for others to find help. :chill:


Anyways, let's see some eye-candyz from you... :crazy:


P.S. Let's try to keep this thread pure for some quality replies. Therefore, if you've any comments or question of anything you see in the replies, please PM those who posted it, thanx. :D
 

·
Registered
Joined
·
1,833 Posts
1. SRT Stage 2 Turbo (soon to be a whacky hybrid of 2.5 and 3)/w58 Supra 5-speed tranny

2. T04e turbo- huge frontmount- external wastegate.

3. There are a bunch of vids and pics with my car in them floating around this site- I am too lazy right now to find them. I have no dedicated homepage to link to.

4. 348rwhp/346rwtq... goal for the car is 400-450rwhp, daily driven and conservatively tuned.

5. SRT did all of the work on my car (301)982-4600.
 

·
Registered
Joined
·
4,019 Posts
Good topic... :D

2002 Solar Turbo IS300 6spd...

# Performance Mods: Toyomoto Stage 5.5 Turbo Kit
# PT-67 Turbo
# Cast Iron Manifold
# Open Wastegate
# Spearco Cutsom Large Intercooler
# Vortech Blow Off Valve
# Haltek E6K
# MSD DIS 4
# 720cc Injectors
# Fuel Pressure Regulator
# Toyomoto Headgasket
# Toyomoto Custom Fuel Rail
# TT Fuel Pump
# Braided Fuel/Oil Lines
# Custom Fuel Intake Fuel Bracket
# Arospeed Grounding kit
# HKS exhaust
# Supra TT GTE shortblock
# Supra TT pistons
# Supra TT rods
# Getrag V160 6spd
# RPS stg 2 clutch
# Lightened Flywheel
# Custom 2-piece drive shaft

Suspension/Brakes:
# TRD Front and Rear Sway Bars
# NEX SS Coilovers
# Big Brake kit (on its way)

Interior Mods:
# Panasonic DVD/MPG/MP3 Player
# 6.5" Alpine In dash TV
# Alpine TV tuner w/ Multizone AV controller
# Playstation2
# Greddy 60mm Boost controller
# Greddy 60mm A/F gauge
# Greddy 60mm EGT gauge
# Custom Gauge Pod
# Blitz SBCi-D Boost controller
# Blitz Power Meter ID
# 2-step

Exterior/Body Mods:
# TRD Carbon Fiber Grill
# IPT Carbon Fiber Engine Covers
# JDM Antenna
# Custom Painted Turbo Piping
# 20% Tint
# RMM rear spolier

Wheels/Tires:
# 18" Arospeed Crazy 8's
# BFGoodrich KDW T/A's 225X35X18


Updated dyno to come shortly: but w/ 14psi on pump gas the car went 463rwhp w/ 454lbftq... and I drive on 17psi daily...

The car is cababile of going up to 34psi of boost w/ c16 race fuel.

Pictures and video located here:=> Featured Ride on RacingFlix.com

Best time at the track:=> W/ 25psi, c16, True Street tires, and an N/A exhaust I went 12.08 @ 127mph...
 

·
Registered
Joined
·
8,661 Posts
Re: =*Boosted IS300 Roll Call*= (PiX & ViDeo Included)

REVISION!

1. SRT Stage 2.5 Turbo, automatic.

2. "T04e turbo- huge frontmount- external wastegate." HKS DLI, E-manage, Valve body upgrade

3. If you do a search you can find them all. I'll dig them up later.

4. 320rwhp at 8.7 psi. 15 psi = ??? Dyno soon to come.

5. XXTuning (XXTuning.com) in Wethersfield, CT installed and tuned. Did all my work!

www.xxtuning.com/customercars/alexz/index.html
 

·
Registered
Joined
·
266 Posts
1. PFS Stage II with R154 tranny.

2. Standard Stage II kit with TT rods and pistons.

4. 399rwhp/401rwtq at 15psi. No track numbers yet.

5. All work done by PFS (www.pfs.cc)
 

·
Registered
Joined
·
1,573 Posts
1. PFS Stage II kit - auto

2. Base stage II kit no mods yet (and I stress yet)

3. 387 rwhp & 383 rwtq @ 15psi with 3" downpipe no exhaust

3a. 330 rwhp & 345 rwtq @ 14psi with L-tuned exhaust (yay L-tuned) Best time at the track was 13.599 @11 psi here is the timeslip (major wheel spinning in 1st and a little spin in 2nd gear) Hoping to hit 12's once I get the LSD installed.



4. Shipped to PFS and installed @ PFS
 

·
Registered
Joined
·
1,063 Posts
1. PFS stg 3 turbo kit, getrag v160, turbo supra rear.
2. Innovative GT 61 full ball bearing turbo, turbo smart external wastgate, hks ss blow off valve, pfs cast iron manifold, spearco fmic, TT rods and pistons, tech 3 emu, 720cc denso injectors, cams( wont be disclosed as to what kind) valve springs , retainers, two walbro fuel pumps, custom 3" exhaust, 3" ss mandrel bent downpipe, Custom fuel rail, hks intake and exhaust cam gear, K&N air filter, blitz sbc id b/c, blitz turbo timer, pfs wideband, and a whole lot of other stuff :wink:
3. Last dyno was 614rwhp and 614rwtq but will be different soon so I will not bother to post it. Best time was 11.4 at 128mph with pfs behind the wheel.
4. Pfs did all tuning and install.



 

·
Registered
Joined
·
4,548 Posts
1. PFS/Stage 1 turbo kit/Auto tranny with PFS Valve body
2. Turbonetics T60-1 HiFi, Turbosmart BOV, non-intercooled :cry:
3. I'll take some soon, promise!! :lol:
4. Dyno #'s pending also, will dyno after PFS exhaust/HKS cam gear/PFS Wideband install
5. Installed in my driveway with a few good friends and excellent PFS support!!

:D
 

·
Podiatrist
Joined
·
23,616 Posts
1. SophieSleeps supercharger kit
2. Power Blower 2510 Unit
3. No dyno #'s yet (unit has caused the engine to CEL and stall)
4. Installation costs = none (everyone refused to install it so i did it myself)
5. Fuel upgrade includes a cabin mounted foot pedal to inject additional fuel.





















 

·
Registered
Joined
·
2,493 Posts
1. PFS Stage 1, auto (w/o the valve body upgrade)
2. Garrett T60-1 HiFi, and other stage 1 components
3. Will post some on thursday
4. Pending
5. Hopefully with Bruce Nomura

There are tons pfs owner, but they rarely post (turnip8snatch, t_lex2001, lexustcy, and more...)
 

·
Premium Member
Joined
·
11,375 Posts
Discussion Starter #14
1. ex-AREA51 Fabrication Stage X on a 01' auto :crazy:

2. Vortech blower, 8psi custom pulley, GReddy Type-S bov, and no intecooler yet.
3. PIX:

VIDEO: Click HERE for video.

4. 267whp w/ no other mods than the kit itself (had to put back all the stock bolt-ons ...arghhh!!!). Dynosheet will be post up soon after i fix my stoopid scanner. :x

5. Dr. Charles Madrid did the full custom fabrication/install/dyno/tunnings...etc He's currently working @ AutoLink in SoCal, and also currently available for any instalation/dyno/tunnings of any type of mods/kits for the IS300. :chill:

PS. this kit will go into production with a help of a reputable speedshop very soon for the price between $3~4K (might be lower than 3K, i'm still working on it). 8)
 

·
Registered
Joined
·
3,359 Posts
well not really IS300, but IS200 .. and make that ex-is200 (driving RX330 now)

AVO Turbo Kit
Garrett T28 turbo
Intercooler
JE forged Pistons and rods
Custom in tank fuel pump
Custom AVO exhaust
and other nutz and botlz required to put the kit together.

Final output was rear wheel 157kw 12psi on stock injectors.. up from 80.2kw rear wheel.

Toyota Final gearing 5.1:1





 

·
Registered
Joined
·
3,746 Posts
Re: =*Boosted IS300 Roll Call*= (PiX & ViDeo Included)

IS300eR said:
1. Brand/Stage#/transmission type... etc. 8)

2. Any background of the setup you like to share with us, I.E. what type of turbine/sc blower? what's the range of boost/power it's able to push? brand and type of wastegate/bov? intercooler brand and type if have one...etc. :wink:

3. A few pictures or a video of the setup and maybe the whole car, too. (A link to your pictures/videos is okay). :)

4. Hopefully some #'s on the dyno sheet and maybe some 1/4 mile time slips are welcome too. :p

5. Techs or shops who helped you install the kit/dyno/tunnings...etc for the car, and some information of them if possible for others to find help. :chill: [/b]

Anyways, let's see some eye-candyz from you... :crazy:

2001 Spectra mica blue auto

toyomoto/custom turbo kit--stage unknown--toyomoto shift kit.
--TT shortblock
--TT pistons and rods
--Apexi Dual Chamber BOV(soon to be 2)
--Haltech E6s-8
--MSD DIS 4
--XS Engineering GTR intercooler
--Toyomoto custom Tubular manifold--(comin this or next week)
--Toyomoto downpipe---(comin this or next week)
--SP73GTS turbo
--6/660cc injectors--(6/1000cc coming too on top of the 660's)
--255lph walbro pump--(second one on the way)
--Toyomoto FPR
--Toyomoto shift kit for the 5 spd Auto.
--(Boost Logic TH400 built racing tranny coming around Xmas.)
--(Boost Logic custom driveshaft comin before Xmas.)
--Turbonetics Racegate.
--Apexi N1 exhaust 3inch
--SC300 head(comin real soon) sending out to be ported
--custom cam setup...(swiftly after the head gets done)
--Custom surgetank and 90mm TB.(on its way)
--...shit I am forgetting stuff no biggie... lots more stuff to come..


on my old setup with a TBKO manifold and T64 Ceramic BB turbo went [email protected] on pump gas 17 psi street tires..

385rwhp at about 15 psi pump gas..

Lance at Toyomoto
Jeff from TBKO
GTE Enterprises
BoostLogic
IS300.net
Clublexus
and ummm ghey jon lai
and Mr.Mark


my street setup [email protected]
 

·
Registered
Joined
·
112 Posts
1. PFS/stage2/auto with PFS valve body upgrade and custom T/C

2. PFS 3'' turbo exhaust 14 lbs of boost everyday pushen 389 to the wheels

3. http://www.cardomain.com/id/pfsturbois300

4. look at the site for doyo #s

5. shiped the car to PFS and they did all the work http://www.pfsupercars.com/

and its all my dads car :lol: but more power is comming :wink: :lol: :p :p :p and wheels and tires

hope you like it
-Aex
 

·
Registered
Joined
·
1,124 Posts
Custom set up . Built by me. I am still waiting on a few parts.

-Electromotive Tec3 ems
-Greddy T78
-TT pistons and rods
-ARP head studs
-HKS cam gear
-Tubular stainless steel manifold
-3.5" DP
-3.5" exhaust piping to a 3.5"inlet tanabe
-custom super huge intercooler with apexi and tanks and 3" intercooler piping
-greddy type R BOV
-ITS progate racegate
-return fuel system w/ aeromotive FPR
-warlbro fuel pump and inline pump
-720cc injectors
-still have 5 speed for now (rps clutch and UR flywheel)
-gs400 throttle body
-greddy profec b boost controller
-greddy gauges
-greddy pulleys
- And a few more things. just cant think right now

No pics and dyno numbers as of yet. Soon though
 

·
Penetration Specialist
Joined
·
23,689 Posts
Wino_II

SRT Custom Stage 3.5

GTE Short Block

V161 6-Speed Trans.

EGT, Fuel Pressure, Oil Temp, Boost, and Wideband gauges.

Too much to list...I'll leave that up for the magazines. 8)
 

·
Mr. Negative
Joined
·
12,387 Posts
Toyomoto
haltech e6x
msd dis
return line
550's
valve body upgrade
finished and tuned

tbko
manifold, downpipe, exhaust
60-1 turbo
i/c and piping


dyno
375whp/370wtq @1bar on pump

slips
[email protected] w/ stock t/c. :oops: (i suck at teh drag)
new one going on and going back to the track next week for comparison.
 
1 - 20 of 146 Posts
Top