Lexus IS Forum banner
timing
1-5 of 5 Results
  1. General Discussion
    Hello, first post here since I’ve been having a lot of trouble pin pointing what the issue is. I have an 01 Manual Swapped IS300 that has ran perfectly fine for the past year and a half. Recently it has been hesitating at low rpm whenever I jab the throttle where it will completely fall flat on...
  2. General Discussion
    I have a 03 is300 with 166k on it and i bought it and the guy had replaced the headgasket and timed it just didn't put the radiator back in and stuff like that. Well i got it and i wanted to do a compression test and im not getting any at all i have all the other gaskets and stuff from the head...
  3. General Discussion
    Hey Guys. At first please don't kill me because of my English, I'm from Germany. So, my IS was leaking pretty bad, it came from the crankshaft seal. So I decided to replace the camseals aswell. I used a new timing belt at the reassemble. Lined up the Yellow mark on the crank pulley with the 0...
  4. General Discussion
    Hey guys. Mad respect first of all i and Doing a whole deal and gasket change out on the02 is3 and Mayhave messed up timing other than lining up crank to tdc and both cams to tdc do i need To know anything elseto CORRECTLY time my GE before i close Up everything? All the vid about how...
  5. General Discussion
    Okay so i just got a 2003 is300 that when i bought it the guy said he put s new head gasket on it and evrything but never finished timing it and i got it thinking that the timing is no problem so i timed it and i can spin the motor over by hand and its good but when i go to crank it to read the...
1-5 of 5 Results
Top