Lexus IS Forum banner

Gas tank building pressure , no codes

696 views 1 reply 2 participants last post by  AutoTech 
#1 ·
Hello guys im new here, I might be posting in the wrong place but here i go....
After installing a bosch450 in my tank I'm using a 6 an return hose I'm noticing my tank is building pressure it's pushing back trough the conector!, seems like it's building pressure , can someone guide me what hose shuld I check!?
I also removed a round canister that looks like a 32oz beer can from under the intake manifold, don't know if it's related or not please help

Quick Reply
 
#2 ·
Hello guys im new here, I might be posting in the wrong place but here i go....

After installing a bosch450 in my tank I'm using a 6 an return hose I'm noticing my tank is building pressure it's pushing back trough the conector!, seems like it's building pressure , can someone guide me what hose shuld I check!?

I also removed a round canister that looks like a 32oz beer can from under the intake manifold, don't know if it's related or not please help



Your tank should be able to vent any excessive pressure through the charcoal canister. My best guess would be you closed off the vent hose to the charcoal canister by capping it or pinching it incidentally. Or your canister is plugged. Hope that helps, and good luck!


Sent from my iPhone using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top